About six-years ago I got these early L100s from the original owner who has been a friend since high-school and college. These were the first L100s I ever heard. He bought them because he was fascinated by my 030 system in the C37 cabinets. They are the early in-line-driver version. Serial numbers are 34314 and 34.316
I've been quite active with them recently, attempting to repair the damage and abuse these suffered from his daze (sic) in the ZBT frat house at UVA in the '70s, later from his kids who poked in dust domes and destroyed the tweeters, and from the many moves these went through, including bad packing by the last moving company in whose packaging I received them.
So today I completed the repair of the first grille frame which came to me with broken particle board and cracked and missing walnut strips, but with a good set of unpainted (dark grey/black) Quadrex replacements I had talked my friend into back when I first joined this group. The Quadrex required some repair and cleaning themselves but they are mostly done. Along the way I've found that the walnut strips on the early systems were at least 1mm slimmer than the later versions. I ordered a set from Steve at Huntley and that's when I found they matched a pair of free grilles from the later versions but were thicker than what was left of the strips on "my" original in-line-driver. They are fitted and the first two applications of Watco Natural has been soaking into the walnut.
So this has brought up several questions in my mind which had me spending much of the day searching and reading the archives here, to no avail. It was fun re-reading Giskard, Zilch, and T-dome's comments on the L100 and the newbie owners who pop in here with the same basic questions. But even I couldn't seem to find satisfactory answers to some:
1. What is the serial number range for the L100? I saw a post making mention of some earlier than these, but is the range actually known? Is there a correlation to the serial number and date of manufacture?
2. What is that extra hole in the grille frame for? I now know that either the early or the late frame will fit the in-line versions and the cutouts seem to be intended to accommodate either version. But what's with that extra hole the same size as the four for the pegs? And this pair have wooden pegs. Was that common on the in-line version?
3. Did anyone ever come up with a readily available substitute for the favored Krylon Semi-Flat Black #1613? I've read everything I could find on this and other sites (Mustang, Corvette) and there's nowhere around here to buy it from an industrial supplier and Granger wants almost as much to ship a case as it costs to buy a case. I shot the first post-repair coat with one of my old cans of #1613 and then, after replacing the walnut strips, used the new Krylon "Satin" #7513 to paint the bottom of the walnut strips and the "gap" where the particle-board shows and the sheen and blending is nowhere as good as #1613. In fact, many hours later, it's still not dry to the touch! I have other Krylon "satin" to try still, but the old 1613 was my favorite even before I tried painting old JBLs.
4. I have plenty of JBL grille badges (none came with the L100s from my friend) but were they originally Velcro-ed in-place so they could be rotated depending on speaker orientation? Or were they attached in some other fashion?
5. I did several test samples of finishes for the walnut strips using scraps after mitering them. The best results seem to come from just straight Watco Danish Oil finish in "natural". But my old can of it was starting to turn to a gel, so I looked into replacing it. Lowe's didn't carry the "natural" and I was unable to find it on the website of Watco's new owner Rust-Oleum. So, on my day off, I went to my favorite hardware store where I'd bought the last can and they had three cans of the "natural". I asked them if they could tell from their price sticker on my old can when I might have bought that to compare current pricing. They said likely 2008. That price tag showed $8.99. Today's purchase was $14.99, but well worth it just to have a new can, but also to help keep alive one of the last "real" hardware stores around here.
I know you guys love visuals, so here's a selection of shots taken along the way, mostly to shame the original owner who told me they were in perfect condition when he sold them to me in the moving boxes. And then refunded most of that cost back to me once I sent him pictures!
![]()