Results 1 to 2 of 2

Thread: 4312SX?

  1. #1
    Regis
    Guest

    4312SX?

    For the Japanese market. Pleated cloth surround woofer, yet it has a Ti midrange?

    http://www11.plala.or.jp/se_ke5583/J...er/4312sx.html

    Adopting 904Ti-1 of the pure titanium inverted dome mid range of 12.5cm to the middle limits, it increases. In order to expand the piston motion territory, as the diaphragm it forms in opposite dome form, 37mm voice coil of the balance drive design is adopted in order to hold down the occurrence of the division vibration. In the magnetic circuit while by the neodymium magnet, we adopt magnetic type, coupled with the Ted the bucket structure by the aluminum die-cast frame and Venn who lets escape back pressure center pole piece, we have improved transient quality and resolution. 25mm interest press pure titanium dome to TW025Ti which is the eater is loaded in high pass. The lightweight aluminum voice coil which administers copper coating is adopted for the pure titanium diaphragm of interest press molding. Furthermore, when heat of the diaphragm is let escape, the felloe fluid ・ dump which raises the damping effect simultaneously is adopted. In order to be able to correspond to the various using as a bookshelf type, the middle limits/continual variable アッテネーター volume of high pass independence is equipped. The enclosure has adopted the twin port system of bus reflex structure. In addition, as baffle strength is raised by the fact that the 25mm thick MDF material is used for the front baffle, phase and diffraction between unit are controlled by the fact that flash it mounts converts medium high pass unit. As for the wrapping with the walnut finish, as for size it has become identical with the old type.

  2. #2
    Senior Member duaneage's Avatar
    Join Date
    Jan 2005
    Location
    The First State
    Posts
    1,585
    THe japanese have long favored speakers with a different tonal balance in the midrange, some might say they prefer a colored midrange. Interesting speaker, the 025Ti would not be my choice for tht system, the 035 would do just fine. Looks like a 2213 ( pro version of 123) style woofer with different tuning for the cabinet.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4312sx
    By leif in forum Lansing Product General Information
    Replies: 1
    Last Post: 06-01-2004, 12:41 PM
  2. SPL for the Ti10K or 4312SX (ie TW025Ti)
    By sebackman in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 02-16-2004, 03:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •