Ok Bo
I wanted to do this outside that baffle thread. Lots of good info in there, figured this belonged outside. Kind of off topic. What they are is 122A's for the 12"s. Should be 2214's but I used what I had and any woofer good enough for the L166 Horizon couldn't be that bad. The lower mids are 115H's as they should be. Got those from a pair of L20t's I had in storage. The 093Ti were NOS off E- Bay. The crossover is also NOS XPL200A from the same guy!! Boy was that a lucky week. No one else was even bidding on the stuff!! Yahoo!! The tweeters are 050 Golds used in the Century Gold again another Ebay no one else bidding score. Tweeters should be 046 TI. So as you can see a hodge podge of drivers not the original design. Sounds real good though. The baffle spacing for the step I got from someone in the forum. The vertical driver spacing I got from scalling photo's in Paint Shop Pro. Counting pixels works very well as long as you have at least one hard dimension and good pictures. Right now they are under my stairs until I can get them up and running agian. No actives on these never got a DX-1 for them. I figured the idea behind the neoprene was to eliminate the baffle effects. I figured I could never replicate the cabinets so I took it to the next step which was minimum baffle and neoprene where I coundn't. Had a great time building them. If I ever get the chance I will put the correct drivers in.
Rob