Results 1 to 5 of 5

Thread: Tweeter interchange

  1. #1
    Senior Member invstbiker's Avatar
    Join Date
    Feb 2005
    Location
    Cave Creek, AZ
    Posts
    431

    Tweeter interchange

    Have two blown LE25's from my original L100.s Anybody know if the LE25-2 OR LE25-4 are interchangable without a polarity issue? THX in advance


    [email protected]

  2. #2
    Senior Member invstbiker's Avatar
    Join Date
    Feb 2005
    Location
    Cave Creek, AZ
    Posts
    431
    C'mon, one of you "guru's" must have the answer, please
    "It only costs 80% extra to go first class"

  3. #3
    dblaxter
    Guest
    hi ,all will work ,with no polarity problems ,le25-1, -2 -4 , and le-26 if need be , others might not have replied ,because ,it may have been to obvious no disrespect intended, good luck ,

  4. #4
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,455
    They'll work fine... same polarity, less than 1 dB sensitivity difference, if any. At most, you might wind up adjusting the tweeter level a small amount, up or down.

    I've seen almost all of the mid-70s JBL speakers that use the LE25, have LE25s, LE25-2s and/or LE25-4s from the factory, interchangably. L100s, L26s and L36s among others... I've seen all three of these models with LE25s and LE25-2s from the factory, with no other changes...

    Regards,
    Gordon.

  5. #5
    Senior Member invstbiker's Avatar
    Join Date
    Feb 2005
    Location
    Cave Creek, AZ
    Posts
    431
    Thank you very much!
    "It only costs 80% extra to go first class"

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. jbl l88 tweeter removal
    By sammac in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 02-12-2005, 10:16 PM
  2. Help... Olsen horn tweeter needed (vintage)
    By GordonW in forum General Audio Discussion
    Replies: 3
    Last Post: 02-23-2004, 02:45 AM
  3. Crossovers for K2S9800 and/or S1M, tweeter over 1,5"driver
    By sebackman in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-16-2004, 02:38 PM
  4. L112- tweeter distorts SOMETIMES?
    By steelyzappa in forum Lansing Product General Information
    Replies: 9
    Last Post: 01-03-2004, 11:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •