I would like suggestions and opinions on the box size, driver spacing and Xover design of a new horizontal MTM center channel speaker for HT/Music use. The components on hand are two 2123J drivers that I got new on EBAY and for the HF I have a 2416H that will go on a 2342 horn. I also have a 2425J and 2344 horn I could use too.
My current fronts are actively crossed over and are as follows per side;
2404-5khz and up
2426H/2344-1200hz and up
2-E120s-150 to 1200hz
B380 clone 150hz and down
4645C 150hz and down
I really am not concerned with deep bass or extended VHF performance. We are after voice and fill for the center channel, midrange clarity is most important and voicing compatable with the existing fronts.
My first thoughts are to Xover at 1k to 2k and possibly a sealed box.
I am not at the skill level of many of our members and will be gratefull for all comments.
Thank you very much,
Don M