I'm being a bit lazy here and wonder if there is someone here that has a schematic for a CD horn compensation circuit to put between an active crossover (analogue without CD comp.) and a 2371 horn with a 242X driver.

A friend is just starting in the JBL world and will build two way system on a budget. Woofers are 2225 and over that a 2418 driver on a 2371 horn. He will be going active XO but the XO has no CD compensation built in. A compromise to keep costs at bay.

Should be just a RCL link to ground in parallell with the driver, but as I normally use DSP I don't have this at hand. And unfortunately I don't have any 1" drivers to experiment on either.

All input appreciated

Kind regards

//Rob