I have a pair of later 4310 monitors, the midrange of one is not working. I've removed and resistance-tested both midrange speakers. The DC resistance in both are identical, which leads me to believe the problem is in one of the crossover networks. The midrange drivers are 2105s.

DC resistance of the x-over was tested by use of the midrange speaker leads. One speaker x-over reads ~4 ohms, the other reads 34 megohms, and that value increases slowly, as if one of the capacitors in the network is charging.

My question is simple. How does one remove the x-over network from a 4310 cabinet? If there are any suggestions, I would appreciate ANY input.

Thanks,
Strat O'Saurus