Results 1 to 6 of 6

Thread: JBL Replacement fillister head machine screws for the 375, 2440,2441,2482 rear covers

  1. #1
    Member JBLPRO's Avatar
    Join Date
    Mar 2015
    Location
    Kennett Square, PA
    Posts
    55

    JBL Replacement fillister head machine screws for the 375, 2440,2441,2482 rear covers

    Hello All,

    I would like to share some more passion for vintage JBL with you. I just had screws made that will fit the rear covers of 2" compression drivers. Yeah, you know those special narrow head fillister phillips 10/32 2" machine screws. The ones that either have bad Phillips heads and or corroded threads. The ones that are not available anymore.
    This is a direct replacement for the original discontinued JBL part. High quality custom made with narrow tall heads that will fit properly into recessed holes of the drivers rear cover. No need to drill out larger holes to fit the wrong screws! Over years these screws most likely have corroded and many Phillips screw heads are damaged. These new replacement screws are made from harder 18-8 Stainless Steel material and will not corrode or rust over time.
    If you are interested please PM me and I will be more then happy to send out a few. And if you need more for a project or restoration you can PM me as well.

    Here are a few pics for you reference..

    Name:  IMG_1778.jpg
Views: 611
Size:  145.5 KBName:  IMG_1780.jpg
Views: 700
Size:  232.8 KBName:  IMG_1782.jpg
Views: 603
Size:  310.5 KB

  2. #2
    Junior Member
    Join Date
    Apr 2022
    Location
    Santa Rosa, CA
    Posts
    12

  3. #3
    Member JBLPRO's Avatar
    Join Date
    Mar 2015
    Location
    Kennett Square, PA
    Posts
    55
    Quote Originally Posted by Delta View Post
    The heads are to wide and do not fit unless back cover holes are modified.. It would be necessary to drill out the holes on the back cover to a wider diameter to accept the larger head socket screw head. Been down this road. That's why I had custom screws made. I wanted them to match the JBL part exactly.

    mike

  4. #4
    Member JBLPRO's Avatar
    Join Date
    Mar 2015
    Location
    Kennett Square, PA
    Posts
    55
    Quote Originally Posted by JBLPRO View Post
    The heads are to wide and do not fit unless back cover holes are modified.. It would be necessary to drill out the holes on the back cover to a wider diameter to accept the larger head socket screw head. Been down this road. That's why I had custom screws made. I wanted them to match the JBL part exactly.

    mike

    Name:  Screen Shot 2022-05-03 at 7.50.47 PM.png
Views: 489
Size:  27.3 KB

  5. #5
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    7,743
    Beautifully made and I remain, as always, in awe of those with the ability to produce these.

    I don't even need them and I'm compelled to have them!
    ". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers

  6. #6
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    Quote Originally Posted by BMWCCA View Post
    Beautifully made and I remain, as always, in awe of those with the ability to produce these.

    I don't even need them and I'm compelled to have them!
    Agreed, beautiful!


    Widget

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 5
    Last Post: 08-03-2023, 06:12 PM
  2. set up for 4520bk-which drivers 2441 2440 2482
    By jpsweezey in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 05-09-2016, 10:41 AM
  3. Screws for 2470 Rear Cap
    By blvdre in forum Lansing Product Technical Help
    Replies: 13
    Last Post: 02-01-2009, 09:10 PM
  4. 2440/2441 diaphragm replacement numbers
    By JohnH in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 06-01-2003, 09:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •