i bought a old A7 from a decease estate the owner no longer . The 511B horn driven by a 902-16HF driver. crossover box at 500hz (N500g) bass driver is 416a.
When i remove the back cover of the 902-16HF, i notice there is 2 capacitors(10uf & 6uf = 16uf) soldered in parallel and connected in series to the positive leads.
Should i remove both capacitors and replace it with a straight through wire? As its already crossover at the crossover box at 500hz why the reason for the capacitors at the positive leads again ? the high pass is done at the crossover box why have another high pass capacitors on the driver positive leads again? If anyone have any idea , greatly appreciated. Can i remove those caps