Good morning,
I hope someone can help me...
I need the dimensions and mounting hole for a Jbl 2214H
I can't find dimensional and mounting documentation on that speaker.
Many thanks to all.
Roberto
Good morning,
I hope someone can help me...
I need the dimensions and mounting hole for a Jbl 2214H
I can't find dimensional and mounting documentation on that speaker.
Many thanks to all.
Roberto
Hi Roberto,
I have this info since i use the 2214H. I need to find it in my DIY binder, but no time right now as i still have to complete and file income tax returns by April 30!!! and i'm not there yet... I'll be back in a few days with the info if you can wait until then. See you later. Regards,
Richard
Hi Richard,
you have been very kind and willing to answer me. I wait and when you can you will give me the information. If you have a drawing it would be even better and if it had the measurements in millimeters ... it would be the top!
Thanks again, bye.
hole 11 1/16"
bolt circle 11 9/16"
you'll have to do the math. See if that lines up with what Richard finds.
Needed to tighten up those L100T screws again anyway
SORRY FOR THE DELAY
2214H DATA
Dimensions given here are not factory specs but rather numbers the user has to measure himself, since the 2214H is more of a OEM type driver than dealer stock on shelf model. I'm not aware of any drawings for this driver showing specifications such as dimensions, weight, or exploded view. I've had most of this data for years.
My caliper isn't large enough to give me digital precision readings here, so second best is human precision... Also i added a few things here that might help others too.
Driver overall diameter: 313 mm
Baffle hole cutout: 281-2 mm; measuring the internal diameter of the rigid original gasket JBL gave me at the time, but never used it since its more like a hard cardboard molding to me, i got 283 mm.
Depth: 143 mm (overal); 133-4 mm mounting deph (from where the driver sits on wood, no gasket in place). So a little deeper driver than a 2206H at 127 mm for example.
Bolt circle diameter: 293 mm
Dustcap: 3" or 76 mm
Cone diameter: 9 3/4" or 248 mm (no surround on driver)
Weight: about 13 lb or 5.9 kg
Volume displaced by driver: 4 L
DC resistance factory spec is min. 5.1 and max. 6.3 ohms
On dimensions say +/- 1 mm tolerance. My measurements are pretty much the same as Grumpy's, for those he measured.
Richard
Hi Richard , simply fantastic !
Many many many thanks !!!
Roberto
There are currently 1 users browsing this thread. (0 members and 1 guests)