Originally Posted by
quindecima
Cabs 95% done, only have to cut the backs, bracing and install batting. I made two mistakes. The driver above the mid is off by 3/8in from center, so is the other speaker. I think I measured wrong (no kidding) and didn't allow for the trim at least they are the same on each one. The bottom bracing is also off, not e4nough reveal in the front and I didn't notice until I set the base on it. It was already glued and screwed and I wasn't about to take it apart 2 days later, I will compensate for that with a 1in.x3/4 Walnut trim.