I'm interested to know if the 420A will work in the big Onken?

I understand the 420A is close to the 416 (?)

T/S specs here -

Xmas inches 0.15
Re 4.6
Vd 19.2
Fs 22.6
Vas
28.2 cu ft
Ref 1.7
Qts 0.47
Qms 6.59
Qes 0.51
Vid 0.20

I'd appreciate any advice on this.....for example, is it best to stick with standard 416?

If going down the Onken path, I'll use the Gene Hiraga design...and use Azura 340Hz on top, crossed around 700Hz, using quality 2nd order xover and quality mosfet amp.

Andrew, Creation Audio, Sydney