2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
In my corner of the world I’ve always heard it pronounced the way that Rusty said. The same as saying Yuri.
Widget
Me too Yuri as in:
https://en.wikipedia.org/wiki/Yuri_Gagarin
Rob
"I could be arguing in my spare time"
Ay as in neighbor, ee as in Yuri—both good choices. I always favored aye as in heist, but then
I like caper movies. The common practice is best, because getting it right shows how plugged-in you are, but since it's not really a word, none are really wrong. Any will be understood.
"Audio is filled with dangerous amateurs." --- Tim de Paravicini
One of my "spare" coaxial drivers has bad surrounds and has been sitting on a shelf in the basement, waiting for me to take time to redo it.
Well, I bought a set of 4 surrounds from Rick Cobb last month, and took the time this week to clean it up and redo it.
The Coaxial tweeter driver was unscrewed off the back and removed while I cleaned all the bad surrounds and old glue off the casting and
back of the woofer cone. I do the cleanup using MEK and scrapers on the frame on my back porch with LOTS of fresh air. NASTY stuff, but effective!
I did the usual 2 step process - glue the new surround to the back of the woofer cone.
I did check it with the 30 Hz test tones - then I let it dry overnight,
Next day glue the surround to the speaker frame, and glue down the 4 pieces of the baffle-spacer in place.
Clothespins can hold that down and in place overnight, then, you're done.
Comparison image of JBL 2214 woofers vs UREI 809A Coaxial driver (Same surround kit)
2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
I stumbled upon this thread @ Audiokarma:
https://audiokarma.org/forums/index....er-see.698532/
A discussion about the former Le Studio in Quebec (https://en.m.wikipedia.org/wiki/Le_Studio) as well as some urban exploration videos of the historic site. They had UREI 815A's! They're actually still there, or were at the time the video was shot. One still in the soffits and another on the floor, the camera man is unaware of their status/significance as he walks past them to pause on a room full of junk instead. Gotta love that about these urbexer's.. The "music" in the videos within that link is terrible, I imagine that if it was possible for fax machines to fornicate, that's what it would sound like. Good thing for the mute feature I guess. Pretty cool to see UREI monitors in the wild, and even cooler to see the acts which might've used them to mix & master their albums.
If anyone else has information about studios which used the UREI 8xx series, please post the stuff here! I've even stumbled across a studio on the west side of Michigan which has two rooms utilizing 813C's and 813B's or A's. Really rad to see them still clocking in on the job.
From memory, Le Studio was built in the 70's in Morin-Heights with large windows and nice forest surroundings proper for creation and low noise recordings. A number of international stars have recorded there, as well as local ones.
Nick Blagona was the Engineer, Andre Perry studio manager and Yeal Brendeist owned the studio (i may have misspell some name here but its pretty much what it was).
However, i simply can't remember the UREI monitors there, nor the recording console they used, dumb me... i might have the info hidden in a pile of Professional Sound Magazines i kept, one of which also presented the Bryston/JBL touring system of a Canadian PA firm.
As i recall, the UREI monitor was designed (at least for the Time Align crossover) by Edward M. Long (Ed Long and Associates). Among other things, he's also credited for the first near-field monitor. Maybe the smaller UREI??
Sorry i can't help you more than that.
Richard
POWERED BY: QSC, Ashly, Tascam, Rolls Mosfet, NAD, and Crest Audio
Very cool set up indeed. Thierry, how do you like that 6500 amplifier?[/QUOTE]Hi well, the 6500 power amp from UREI sound good, very powerfull, a bit noisy fan on, i have to exchange the thermistor to lower speed fan (all my studio is in one room). But the sound is very very clear, i have some other amps, but i amways at last for the final mix use the 6500.
Pretty cool. Maybe they upgraded at some point? I think the music video to April Wine's "I Like to Rock" shows a lot of footage from the studio, but no monitors.
Good to know, thank you for the response. I can't seem to find very much information about the 6500, but I've got my eye on them. How difficult was it to change the thermistor?
Not sure how I missed this thread for... checks calendar... 8 years? Being the guy that makes the wooden replica Urei horns I'd have thought I'd noticed.
I started out building the B series drivers because the parts were plentiful and cheap. Heather's comment about Urei being a good value applies double to the B series since there is no Altec at all. And yet the B series really sounds great. I've got 813B monitors I build–including the 840 networks–in my workshop powered with Urei 6500 amps.
Here's few Urei tidbits...
The Super Urei 811A monitors in fiddleback anigre and redwood burl.
An assortment of horns from an original Altec 604E, And early Urei aftermarket horn for 604E (Mounting for these was slightly altered for the first production monitors), an 801AA horn from A series monitors (604 8K), a B series horn (PAS 1580CX woofer and JBL 2425h compression driver) and an 803 horn (from 12" 809 monitors)
A pair of original 811 monitors that are now in the Nashville area in Alan Freed's grand daughter's studio...
A pair of my wood horns for 604 8G based monitors (There were actually for OEM Audio Marketing "Big Red" monitors)
A set of B series horns for a home theater...
30Hz Bass Horns/K151, Custom mid bass & midrange horns/Cogent DS 1428 & 1448 field coil drivers, Fostex T925a tweeters.
Wow, really nice cabinet.
For a fella who likes the look of the blue horn, what type of foam did Urei use or what can I use to redo mine? Looks to be made from a pool noodle.. Also looks like they were painted blue, what color would be a suitable match? Would you happen to make replacement kits? My foam seems to be in good shape, but has deformed a bit. Not sure if it makes much of a difference, my ears still find these speakers to be quite tasty.
2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
There are currently 3 users browsing this thread. (0 members and 3 guests)