4301 gril dimensions

[WDJ]

Anyone have the dimensions for the 4301 grille? I just missed a pair on ePay a couple of weeks ago....

I can get the outside dimensions but would like to get the inside dimensions, grill thickness and the radius of the outside edge.

I bought a pair of 4301E (SN 10080 and 10082) and have them going again after a refoam and would like to give them to my daughter for Christmas. Already got the blue cloth from Doodle6 a couple of months ago.

Thanks,
Wayne

[austx]

are they 4301 or 4301B outside dimensions?..

[austx]

I had a few minutes, so I measured my 4301B grills and whipped up a drawing..attached..
I work in decimals, so that's the dimensions you get..most of them will convert to usable fractions..
good luck..

[WDJ]

Really appreciate it, looks like the 4301E has the same externals as the B.

Thanks for the help,
Wayne

[austx]

if you happen to have extra of that blue, I'd be interested in enough of it to do my 4301Bs..

[WDJ]

I'll measure twice to see. I bought enough to do my 4315s and 4311s so getting the 4301s done is going to require some "stretching" as it is.
(I like the blue.........)

With luck I can get them done this weekend and let you know.

Thanks,
Wayne

[WDJ]

Might try some of the folks in this thread also:


http://www.audioheritage.org/vbullet...le-Cloth-(2011)

[austx]

Thanks..
If you get a chance, post pictures of the grills you make..and share your experiences regarding the gluing of the fabric to the frames..