Results 1 to 2 of 2

Thread: upgrade of xover

  1. #1
    kalkan0
    Guest

    upgrade of xover

    hello, I am owner of an enclosure 4320 equipped with the following speakers: LE15A, 375, 2405. the filter was produced by Rinaldo Bassi 25 years ago. I would like to know if the filters 3105 and 3115 would be adapted for my configuration. I don't know if the horn of the 375 is adapted to go to 500 Hz.
    Thank you for your advice
    Maurice

  2. #2
    Senior Member
    Join Date
    Nov 2003
    Location
    Toronto
    Posts
    1,162
    You don't mention it, but I assume you are using a 2311/2308 horn/lens combination with the 375. If so, you have close to what I am using above 100Hz in 4325 cabinets.

    I would highly recommend you look into building the voltage equivalent circuit that Giskard provided of the 4333/L300 if your 375 is 16 ohms and the 2405 is 8 ohms.

    The woofer / mid crossover point ends up at about 800 Hz.

    It's fairly easy to get the parts and put together. It works very well.

    Try a site search under 4333 or 3133 crossover.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L250 -> 250Ti Upgrade and Differences
    By jblnut in forum Lansing Product Technical Help
    Replies: 46
    Last Post: 04-22-2005, 02:29 AM
  2. Xover frequency - am I deaf or what??
    By scorpio in forum Lansing Product General Information
    Replies: 2
    Last Post: 01-14-2005, 10:36 AM
  3. HELP DIY L250TI XOVER & CABINET
    By gerard in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 12-01-2004, 03:31 AM
  4. 4331 & L-200 upgrade?
    By Figge in forum Lansing Product General Information
    Replies: 1
    Last Post: 08-06-2004, 01:06 PM
  5. Advice requested for xover for old JBL D131 and new horn
    By jonathan z in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 12-13-2003, 11:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •