port size for 416 16z Altec 15" speakers

[lewisclan]

I have a set of Altec 416 16z speakers and a set of 806 High freq. drivers Ive down loaded the loudspeaker enclosure design guide but I does not give me the port sizes for a given enclosure, I see it states that a 7.5 c.f. Regular port bass reflex enclosure is optimum, witch I will use.
I just cant figure what size of port I need for that 7.5 box.
Can anyone give me a hand Im a dork and cant figure this out.

By the way My name is Jay and you have an awesome site I am glad I found it .
Thanks in advance

[rudy sesztak]

Hi Jay, I have some old Altec literature.With a 416 type woofer in a 7.5 cubic ft,regular port cabinet, the port size should be 42 sq in. If you want a much better extreme high end response, try using great jbl 077 tweeters, if you can find a used pair.- RUDY

[lewisclan]

Thanks for the info

[RKLee]

I built my Altecs using this guide from Altec. If you are building a loudspeaker enclosure, this is a must read:

Altec-Lansing "Loudspeakers: Their Design & Use
http://www.lansingheritage.org/html/...enc-manual.htm

Check this out:
http://www.lansingheritage.org/image...ign/page12.jpg