Although my initial impressions were good, after extended listening sessions, I knew something was a bit off. It turns out that at identical crossover potentiometer positions for both left and right channel, the output is different by ~ 2dB. I noticed that placement of voices and instruments was not originally where I knew them to be on very familiar source material. I then put on a stereophile test disc to confirm this and reducing attenuation by exactly 2db in right channel (I have separate attenuators on my integrated amp for left and right channels) brings the proper balance. I know it is not the amp or cd player that is the problem since with the stock crossovers, balance is perfect. Once the balance is adjusted, the sound is superb. So going to have to track down the problem - I wonder if a resistor is out of specification. The resistors look newer but are identical to the ones in my original crossovers.
Thanks,
Don
There are currently 3 users browsing this thread. (0 members and 3 guests)