Can some one tell me how to wire up this system, I think I get the LX5 part but not sure whenadding the N 7000.
Can some one tell me how to wire up this system, I think I get the LX5 part but not sure whenadding the N 7000.
You wire the HF out from LX5 into the input of N7000.
I have noted the following wire coloring from my Sovereign's:
LX5:
1 - Green
2 - Black
3 - Red
4 - Black
N7000:
1 - Green
2 - Black
3 - Black
4 - Red
Johnny Haugen Sørgård
Umm, this looks like some pretty good information: http://audioheritage.org/vbulletin/s...57&postcount=2
But then this might help, too: http://audioheritage.org/vbulletin/s...8&postcount=22
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
This places the MF & HF 180 degrees out of phase with the LF around the crossover...as is standard practice with the LX5's 500Hz crossover point. You can experiment with reversing the HF and even the MF connection to see which you prefer from your listening position.
Thank you all for the help, long time project coming to an end.
There are currently 1 users browsing this thread. (0 members and 1 guests)