Results 1 to 15 of 17

Thread: Refinishing JBL L250

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    May 2009
    Location
    Los Angeles, CA
    Posts
    7

    Refinishing JBL L250

    I recently inherited my father's JBL L250 speakers, the ones I grew up listening to in the 70's. In the 80's my parents had them painted black and now I want to restore them to their original natural wood finish.

    The first thing I noticed when starting to formulate a plan is that there appears to be a panel on the back opposite where the high frequency dome radiator is housed but there doesn't appear to be a way to remove it. Any ideas on how to remove this before starting to refinish the cabinet? Any other advice/guidance would be appreciated.

    Also: the wire mesh dome grills are dented. Do replacement parts exist for this speaker? My father bought these new and I don't think they have ever been serviced. They still sound good.

  2. #2
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042
    Congratulations on your L250s. I hope the circumstances of the inheritance were positive.

    They're iconic JBL speakers and still one of the greats. I count mine among the top ten of JBLS I've had (and heard) over the years.

    The access panel to the 044-1 tweeters is indeed on the back. From a distance, you can see the panel on the back of an L250 behind the one in front.
    Attached Images Attached Images  
    Out.

  3. #3
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042
    In this angled shot of something else, you can see the location of four of the screw holes that hold the panel in place. There are eight in all.
    Attached Images Attached Images  
    Out.

  4. #4
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042
    So, you might want to check to see if you have screw holes in those locations, perhaps covered with wood filler and painted over.

    Mine were already popped out when I bought them out of the back of a shop.
    Out.

  5. #5
    Senior Member Fred Sanford's Avatar
    Join Date
    Jun 2005
    Location
    Shenandoah Valley
    Posts
    1,608
    Quote Originally Posted by Titanium Dome View Post
    In this angled shot of MY SAD, NEGLECTED LASERDISC PLAYERS, you can see the location of four of the screw holes that hold the panel in place. There are eight in all.
    Fixed it.

    je

  6. #6
    Junior Member
    Join Date
    May 2009
    Location
    Los Angeles, CA
    Posts
    7
    Great! I can faintly see where the screw holes have been covered with filler and paint. Thanks for your help. Now, where is that sandpaper ...

    --bg

  7. #7
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    7,756
    There was a thread here about getting that panel off. Something involving levers and 2x4s, if I remember correctly. I'm sure someone can find it but I'm not using the correct search words. For that member, at least, getting the panel off was far from simple, even with the screws removed.


    Good luck.
    ". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers

  8. #8
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042
    Quote Originally Posted by Fred Sanford View Post
    Fixed it.

    je
    Why I watched Caligula on laserdisc just the other day--or at least as much as I could stand.
    Out.

  9. #9
    Senior Member Fred Sanford's Avatar
    Join Date
    Jun 2005
    Location
    Shenandoah Valley
    Posts
    1,608
    Quote Originally Posted by Titanium Dome View Post
    Why I watched Caligula on laserdisc just the other day--or at least as much as I could stand.
    I watched a blues concert with John Mayall & the Bluesbreakers + guests.

    I've never seen Caligula, but have heard of its reputation.

    je

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. When JBL was JBL...Your first Encounter
    By Ian Mackenzie in forum Lansing Product General Information
    Replies: 109
    Last Post: 06-14-2022, 10:17 PM
  2. New to Forum; JBL (proud) owner
    By Brad Anbro in forum Lansing Product General Information
    Replies: 0
    Last Post: 09-01-2008, 06:00 PM
  3. hi jbl
    By amadeo in forum Lansing Product General Information
    Replies: 21
    Last Post: 12-04-2007, 03:35 PM
  4. Refinishing JBL L110 Cabinets
    By Dave918 in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 07-26-2003, 06:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •