Results 1 to 12 of 12

Thread: is there a current replacement for the LE20 tweeter

  1. #1
    J. Cairns
    Guest

    is there a current replacement for the LE20 tweeter

    I am looking to swap out the LE 20's for something better. Keeping in mind that they should compliment my LE 10 A woofers. The second question is - would I still be able to use my LE 11 crossover with the new tweeters?

  2. #2
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by J. Cairns View Post
    I am looking to swap out the LE 20's for something better. Keeping in mind that they should compliment my LE 10 A woofers. The second question is - would I still be able to use my LE 11 crossover with the new tweeters?
    The current JBL Transducer Replacement list has the 035TIA as the "last resort" acoustic equivalent substitute for the LE20-1.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  3. #3
    Senior Member soundboy's Avatar
    Join Date
    Mar 2004
    Location
    Oregon
    Posts
    211

    LE26

    If it were me, I would use the LE26 from the 4301/L19. They are surprisingly smooth, considering the use of paper. They are smoother and go a bit higher than the LE20, from what I have heard....They also will sound much nicer at a lower crossover than a 035ti, IMHO. One of the reasons that the 4408 monitor sounds irritating and hard to me, is I beleive the low 2500hz crossover of that titanium tweet. The 4406's don't have the same problem. Just my opinion, as the 4301's, with the same driver sizes, to my ears don't irritate in the same way.
    They should work fine with the exixting crossover, as well.

  4. #4
    Senior Member
    Join Date
    Sep 2006
    Location
    San Jose
    Posts
    846
    Quote Originally Posted by edgewound View Post
    The current JBL Transducer Replacement list has the 035TIA as the "last resort" acoustic equivalent substitute for the LE20-1.
    Why do you (or who ever you are quoting) call it last resort? I normally wouldn't be interested but last night I dropped an L100 right on it's tweeter. I don't plan to use it soon but I will have to do something about the tweeter. What are 066 characteristics in comparison ? I've got a pair of heath speakers I can take the right speakers out of. I don't plan to sell so original doesn't mean that much to me. I don't plan to part either unless it's for play time. I couldn't exactly tell you why but I always sort of hated that tweeter. Most of their drivers of the day seemed sort of special it seamed like just another tweeter. I could be wrong. Have been before.

  5. #5
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Thom View Post
    Why do you (or who ever you are quoting) call it last resort? I normally wouldn't be interested but last night I dropped an L100 right on it's tweeter. ......

    .... I couldn't exactly tell you why but I always sort of hated that tweeter. Most of their drivers of the day seemed sort of special it seamed like just another tweeter. I could be wrong. Have been before.
    Thom,

    Let me clarify what my source is. My source is my JBL Professional Factory Authorized Service Manual.

    The 035TIA is quoted as a last resort option should a certain transducer be no longer available or repairable.

    You see...when a vintage part is no longer in production the service manual suggests a currently available factory replacement. Ideally one that is supportable with current replacement parts.

    Now...LE25's of different flavors are available on the used market and are
    repairable...The D8RLE252 is currently available.

    If your L100 has an LE20 good luck finding parts. If you have an LE25-2 you're in luck....it can be rediaphragmed to new condition for about $90/ea. I believe the only difference between the LE25 and LE25-2 is the foam ring....-2 has a neoprene rubber ring rather than open-cell foam...it doesn't rot.

    So...that's why I say these things...because I'm authorized by the factory to say them on their behalf.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  6. #6
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,291
    Quote Originally Posted by edgewound View Post
    So...that's why I say these things...because I'm authorized by the factory to say them on their behalf.

    WOW

  7. #7
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by John View Post
    WOW
    Then you should just ignore factory supplied info.

    After all...I was asked what the quoted source is.

    Apparently an honest answer isn't appreciated....

    Whatever.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  8. #8
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,291
    Quote Originally Posted by edgewound View Post
    Then you should just ignore factory supplied info.

    After all...I was asked what the quoted source is.

    Apparently an honest answer isn't appreciated....

    Whatever.
    Hi Edge Relax, I was trying to inject humor into the forum. I know there is a lot of stress out there in socal but you got to smooth out the edge!!!

    I know it can get frustrating with handing out info and then
    being questioned about it, but you have to expect that on these public forums

  9. #9
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by John View Post
    Hi Edge Relax, I was trying to inject humor into the forum. I know there is a lot of stress out there in socal but you got to smooth out the edge!!!

    I know it can get frustrating with handing out info and then
    being questioned about it, but you have to expect that on these public forums
    Fair enough, John.

    The stress in SoCal is a good kind....just ask your recently ex-expat that's going as far Southern California as can be to get away from you effin' Canadians.

    Humor.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  10. #10
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,291
    Quote Originally Posted by edgewound View Post
    Fair enough, John.

    The stress in SoCal is a good kind....just ask your recently ex-expat that's going as far Southern California as can be to get away from you effin' Canadians.

    Humor.
    As far as I know there is no such thing as good stress

    As far as Ken going to Mexico? He will be back.

    Care to place a bet

  11. #11
    Senior Member jim campbell's Avatar
    Join Date
    Nov 2005
    Location
    Winnipeg ,Siberia
    Posts
    1,164
    Quote Originally Posted by John View Post
    As far as I know there is no such thing as good stress

    As far as Ken going to Mexico? He will be back.

    Care to place a bet
    one would have to question the sanity of of anyone who had not one but two chances to flee only to return, except maybe at gunpoint

  12. #12
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by John View Post
    As far as I know there is no such thing as good stress

    ...
    Eustress...That's what we search for and hopefully find

    ...like the right replacement tweeter.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is it sacrelege? Am I evil? (long) - 4343 xover mods
    By 4343mod in forum Lansing Product DIY Forum
    Replies: 63
    Last Post: 05-11-2010, 03:20 AM
  2. Different Tweeter to Tweeter Question
    By Ducatista47 in forum Lansing Product General Information
    Replies: 0
    Last Post: 10-09-2006, 08:29 PM
  3. Santana II Tweeter replacement
    By Cavalryman40 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 08-12-2005, 07:49 AM
  4. 044 tweeter replacement
    By Peter Kaae in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 02-05-2005, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •