Today I bridged my Adcoms on the the 250TI, 400 each , certainly loud! While we were re wiring the connections I wanted to test the phase of the speakers. I knew they had been refoamed so it is trust but verify. When I tested the speakers it appears the woofer were reversed. I used a D 1.5 V battery to check. Putting positive to positive and neg to neg the cone wouild move in, both speakers. Removed the woofers and switched connections.tested again and was good. I also tested my L20T3s which currently are just sitiing on top of the 250s.They were correct
My question is about the wiring. The black wire from Xover was on the neg and the green wire was on the pos, and I switched them. Tested again now correct. I thought that the green would have been + and the black - but again this is backwards to what I observed. I also checked the mid woof by touch for movement, hard to be sure, but seemed correct as it was.
If this the end of this issue great but if something is wrong I want to fix it. I will wait before I do anything else
Thanks for the advice
Mark
It appears to have more bass now but it could either I am giving them more power or i am hearing things that I want to hear....