Results 1 to 8 of 8

Thread: L300 Help my dream come true!!!

  1. #1
    Junior Member
    Join Date
    May 2006
    Posts
    4

    L300 Help my dream come true!!!

    Hi everybody, Iīm a Brasilian JBL fan. Initially, I would like say from the start that my english is not god, sorry.

    I have a L65 JUBAL and itīs used with my Marantz 510M Amp. Iīm planning to DIY a L300 from the ground. First because I donīt have enough money to pay them, second that to shipp to Brazil I will pay more $2500 for the freight and tributes, what makes the buying indequate.

    I will separate the job in two parts: Cabinet and Electronics.

    Cabinet:

    1 - What the dimension of the L300?
    2 - What kind of material could I use? MDF?
    3 - What kind of internal material that I will have to put?

    Electrics:

    1 - Where can i find the schematics of the crossover?
    2 - Can I use other midrange (vifa, scanspeak) with the same result?
    3 - What have to be JBL in this speaker to get the same result? Woofer? L077?

    I would like to ask where can I find some information about the cabinet and the schematics of the crossover (N333).

    As Iīve noticed, the price range for the L300 is 2500~3500 US$, what is out of my budget.

    I ask for help to make this dream come true.

    Murillo (BRASIL)

  2. #2
    Senior Member remusr's Avatar
    Join Date
    Dec 2005
    Location
    Lethbridge, AB
    Posts
    297
    Murillo - you can find all that info on the site using a search including the crossover schematic which is also on the the JBLPro website.
    - Roy

  3. #3
    Senior Member remusr's Avatar
    Join Date
    Dec 2005
    Location
    Lethbridge, AB
    Posts
    297
    Murillo - also noticed there is currently a complete set of drivers & Xover son EBay for $1749 USD. And boxes. Less$ than you referred to but shipping will add to it.
    EBay.com Item# 9721209357

  4. #4
    Junior Member
    Join Date
    May 2006
    Posts
    4
    Thanks fot the information, Iīm currently bidding a pair of 136A on Ebay, which is a good start. Take care.

  5. #5
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042

    Smile Bom dia, MURILLO

    I know the site can be challenge to search, especially if your English is not strong. Did you find these?

    http://www.lansingheritage.org/html/.../1975-l300.htm

    http://manuals.harman.com/JBL/HOM/Te...ummit%20ts.pdf

    http://audioheritage.org/vbulletin/s...58&postcount=2

    ------------------------------------------------------


    Plus here's some important reading for you.

    http://www.lansingheritage.org/html/...979-manual.htm
    Out.

  6. #6
    Junior Member
    Join Date
    May 2006
    Posts
    4
    Thanks for the information. Good luck REMUSR with the ebay 136A bidding!

  7. #7
    Junior Member
    Join Date
    May 2006
    Posts
    4
    Quote Originally Posted by Titanium Dome
    I know the site can be challenge to search, especially if your English is not strong. Did you find these?

    http://www.lansingheritage.org/html/.../1975-l300.htm

    http://manuals.harman.com/JBL/HOM/Te...ummit%20ts.pdf

    http://audioheritage.org/vbulletin/s...58&postcount=2

    ------------------------------------------------------


    Plus here's some important reading for you.

    http://www.lansingheritage.org/html/...979-manual.htm

    Thanks! Thanks! Thanks Titanium Dome! Incredible material!

  8. #8
    Senior Member remusr's Avatar
    Join Date
    Dec 2005
    Location
    Lethbridge, AB
    Posts
    297
    Murillo - I won the 136A's, sorry.
    Did you look at the EBay L300 driver/xover item I posted earlier in this thread? It may be high by $500 cw buying full L300 speakers but individual components go for more and this is in the range of what things are going for. And it is everything in one place, except no 2308/L91 lenses. Also may have to recone/foam the woofs. I am not planning to bid.

    PS - I do not think you can sub much of anything, other thatn the enclosure, and still end up sounding like L300's. Maybe the midrange with something from TAD or Radian but that is by reputation, I haven't heard their drivers.
    - Roy

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L300 Grill Cloth Measurements
    By majick47 in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 09-02-2006, 10:33 AM
  2. Replies: 30
    Last Post: 05-04-2006, 08:07 PM
  3. Help with my JBL L300 "fuzzy" in one speaker.
    By jpchleapas in forum Lansing Product Technical Help
    Replies: 16
    Last Post: 05-05-2005, 02:57 PM
  4. L300 convert to 4343?
    By tv506 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 10-24-2003, 12:08 PM
  5. amp for L300
    By tv506 in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 08-08-2003, 06:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •