Thanks. I will be thinking on the project some more. Thanks for giving me a start.
Type: Posts; User: billiam62; Keyword(s):
Thanks. I will be thinking on the project some more. Thanks for giving me a start.
If you were going to use an LE8T in a build as a two way adding a tweeter into the mix, where would you cross it? Also, any ideas on a tweeter that you believe would be a good fit. This is a loose...
If my calculations are right, I would estimate the internal volume of the lower chamber to be 3.4 cubic feet not counting braces.
The L220 that I have uses the LE14H. The passive radiator (PR15D) and woofer have its own chamber as the tweeter and mid are sealed off from it. Does anyone know how big the lower chamber is? I...
I am working on a project pair that I picked up in a thrift shop. I have refoamed drivers and replaced some of the capacitors for now. I listened to both speakers today and I thought they sounded...
I feel comfortable with a router. I bought these at a thrift store. The feet are long gone. What I had actually thought of at one point is to remove all the veneer in a straight line about 3/4 of...
There are also superficial scratches. I don't think there is anything major, but it will take a while to make them nice again.
I am working on a pair of L220s. They have what I guess is normal wear and tear of chips in veneer at the bottom of the speakers. I would like to ask two questions. What is a normal process for...
Thanks. This site has been very informative.
I am working on some L220 crossovers. There are some capacitors that I would like to replace but am looking at 36uf among others that have proven problematic to find or without ending up spending a...
In looking at the woofer better, it is actually an LE14H. What I thought was the smooth inner side was actually the lip with the black plastic ring. The last driver (LE8)I worked on did not have...
I came into a pair of L220s for a price that was very reasonable, IMO. I knew that the foam surrounds need to be replaced. In looking at the LE14A, I guess I was expecting some type of lip for the...
When I opened mine up, the drivers had been painted black (aluminum dust cover as well). None the less, I will treat them as an LE8. Thank you
The full range in my speakers is marked LE-8-101. Is that an LE8T? Something very close? Are there some specs somewhere on the LE-8-101 from the Lancer 33?
Does anybody have the specs of that driver?
Does anybody know of those being available anywhere or some type of suitable material replacement?
I have actually purchased two foam surround kits for the LE8T drivers that I am working on. They were both advertised as being for this driver. One, if I install the surround inner edge as designed...
I ended up using gorilla tape and that seemed to work. Thank you.
Thank you. I will try that. Does anybody sell replacement aluminum dust caps?
I left my project out on the kitchen table. Unfortunately, a child that my wife was watching decided to push in the aluminum dust cap on one of my drivers. :banghead: Is there a safe way to take...
I was at a Deseret Industries (like a thrift store) Thursday in Burley, ID. They had some of these sitting there. They needed work but I know they are worth something for someone who can fix them...
I found the opposite on the LE8. The foam surround was still quite attached and "stretchy". For the one driver that I have done, it took me probably close to an hour to get the underside foam...
Thank you for the advice on removing the paint. I have been able to get that off pretty well. I would like to ask if anybody has a way to remove the foam surround from the bottom side of the cone?
The driver that I took pictures of is in the best shape. The other driver is definitely showing multiple cracks.
It did not come with a plastic trim. I gently pulled (pried and yanked) the grill cover off of the speaker and that is how it appeared. I am almost positive that this has never been opened. I will...