Information about HP580 series..?

Hi,
I have alot of troble finding information about the HP580 series.
So i hope one of you guys in here can help me.
I have tryed to talk to JBL California, Haman Scandinavia and so on.
Any information would help. (like, retail price, where were it sold, how many were made, a the spec's i got correct and so on)


The information i have found:

Max Recommended Amp Power – 250 Watts
Nominal Impedance – 4 Ohms
Frequency Range – 30Hz – 27kHz
Sensitivity (1watt@1meter) – 91dB
DCB Crossover Frequency – 100Hz
Crossover Frequencies – 800Hz, 3.5kHz
DCB Drivers (two in compound configuration) – 10”
Midbass Driver – 8”
Midrange Driver – 5”
High Frequency Driver – 1” Pure Titanium
Dimensions – 42.9” H x 16.5” W x 14.6” D
Net Weight – 66 lbs each
Shipping Weight – 72.6 lbs each

I have 4 of them and the TiK Center, in a surround setup.


Thanks for reading this, and hope you can help me.


Best Regards
Sixon

I've recently purchased the HP580,after looking for over a year! to find a set.
The ones I have come from the 1st owner who bought them in 1995,for 7000 D-mark (3500 euro).
All foam edges need to be replaced,a job which I've done before.

I already own the HP430,which is easier to find.

Attachment 32635

I picked up some HP420s a while ago, from the original owners. I now want to hear the HP530s, they sound like a better design. I am growing to like the 420s, though, after some time spent with placement & system swapping.

http://www.audioheritage.org/vbullet...ad.php?t=19706

je

I've replaced all of the foamsurrounds (2 x 10" push-pull & 1 x 8" front) on each speaker.
Today I put them back together & played some music,the sound is beautifull!
The best JBL speaker I've heard untill now.

I've got them connected to a Yamaha DSP-A1 and using the HP420 as rear speakers.

I got the foamsurrounds from audiofriends.nl the whole set (6 surrounds & glue) costs 50,- euro

Quote:

---

Originally Posted by JIM123456789

I've recently purchased the HP580,after looking for over a year! to find a set.
The ones I have come from the 1st owner who bought them in 1995,for 7000 D-mark (3500 euro).
All foam edges need to be replaced,a job which I've done before.

I already own the HP430,which is easier to find.

Attachment 32635

---

Thanks alot for the information... :)
I have been looking for that book over the speakers.
And the price he said he paid in 1995 is about the same price i have been told.

Thanks again

//Sixon

I've just started a new topic about the Hp580. Can someone take a look at it, then give me some advices? Thanks!