2360A horns with older drivers
Curious if anyone has ran any of the older 1 inch compression drivers with newer horns. I'm planning on buying a set of 2360A horns that came up on marketplace near me. From what I've gathered digging around this forum, most people run these with the 2445 or 2450 drivers (or TAD for those with larger budgets than mine).
I have not yet purchased any 2 inch drivers, but I do have a pair of LE175s I could throw on with adapters[URL="https://www.ebay.com/itm/185416737630[/URL]. I plan to use some 2405 slot tweeters for >10khz, so high end isn't really much of a concern.
Is this something that other people have had luck experimenting with? Or should I just go ahead and buy the 2445/2450s?
The rest of the story . . .
You also will need a tailored frequency response pre-emphasis to use that horn successfully. I am not aware of a passive crossover that provides it. JBL M552 and M553 or 5235 with the appropriate cards will be necessary for analog bi-amping.
Also, if you do end up buying the horns, be sure they come with the correct throats; you would have nothing without the correct throats.