View Full Version : 2410 an equivalent to 175 DLH ?
jan_slagman
01-02-2006, 05:19 AM
Hello,
Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.
Jan Slagman
The 2410 is the LE175. The horn I'm not 100% certain of. Others may know.
Ron
4313B
01-02-2006, 06:29 PM
I can't remember if it was the 2301 or 2305. I want to say the 2301 was a later version. I think subwoof knows for sure.
***
This is all I could find:
http://audioheritage.org/vbulletin/showthread.php?t=1919
edgewound
01-02-2006, 06:59 PM
Hello,
Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.
Jan Slagman
2410/2305 is the same as 175DLH....I just checked my 1976 JBL Pro catalog
subwoof
01-02-2006, 09:27 PM
The 1290-1217 ( pretty sure that's the number ) was used for BOTH the 1" masher variants. I actually had one of each a few years ago.
That horn was often mated with the 175 driver but there WAS a variant of the black magnet alnico types that had phenolic diaphrams.
The 2305 had a removable mounting flange and was slightly longer than the 2301 whose flange was integral.
LE175 = 2410
LE100S = 2460 ( there might of been a 175HP but I'm not sure )
LE85 = 2420
LE85HP = 2470*
375 = 2440
375HP = 2480
*Note the 2461/2470/2482 had an aluminum voicecoil while the older ones were copper
sub
ps I have a set of LE10A and PR10 with NOS jbl cone kits installed....need any
:cheers:
jan_slagman
01-05-2006, 02:56 AM
Tanks all of you for helping me out ! I really appreciate your input !
Jan Slagman
The Netherlands.
paragon
01-05-2006, 01:13 PM
I would use this above 1500 Hz only.
Windsor2k1
01-05-2006, 03:37 PM
Short ?---- What's the difference??... I have a set of 2421a...
Will
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.