View Full Version : Looking at the dia's in 2425 -
clmrt
11-14-2005, 10:20 AM
- to see if they are real JBL or not - what's the procedure? Three philips head screws on the back and lift off the back plate?
Any danger?
I am selling some, and someone wants a pic of the frams.
Thanks in advance for any advice ---
- CM
frank23
11-14-2005, 12:10 PM
if you stick to taking off the back plate, there is hardly any danger
if you try to remove the diaphragms themselves, be carefull, they might be stuck a little
frank
Don Mascali
11-14-2005, 12:17 PM
Beware of big magnets vs metal screwdrivers.:biting:
clmrt
11-14-2005, 12:32 PM
I guessed while I was away - right, no biggie. The screws seem a bit soft. Do I have good news or bad news? :(
edgewound
11-14-2005, 01:47 PM
You have good news. On the terminal that has the red wire, a red marking means D16R2425....a green marking means D8R2425.
clmrt
11-14-2005, 01:52 PM
:D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.