tesla
09-02-2005, 07:33 AM
Ok, first a warning!
Since I wrote my last post, I actually got around to checking the DCR of both speakers. DUH...
One speaker, 6.6, other speaker, megohms. Thats right, megohms. Oh Oh. First thought was to cut the dustcap off. Squelching that thought, I resoldered all terminals on both speakers. Viola! they are now 6.6 and 6.7! No recone now!
Now, remember the foam that is glued onto the outside of the basket? The stuff thats there to seal the speaker if you mount it to the inside of the baffle? Do I just go to Home depot and pickup some diy foam tape? Or do I use some other method?
Thanks
Gene
Since I wrote my last post, I actually got around to checking the DCR of both speakers. DUH...
One speaker, 6.6, other speaker, megohms. Thats right, megohms. Oh Oh. First thought was to cut the dustcap off. Squelching that thought, I resoldered all terminals on both speakers. Viola! they are now 6.6 and 6.7! No recone now!
Now, remember the foam that is glued onto the outside of the basket? The stuff thats there to seal the speaker if you mount it to the inside of the baffle? Do I just go to Home depot and pickup some diy foam tape? Or do I use some other method?
Thanks
Gene