View Full Version : DATA on JBL 240TI ?
hitachi
08-07-2005, 07:36 PM
Hi.
Could someone please tell me where to find some data
on the JBL 240TI ? I tried the search link and I tried the
internet , but did not find anything I could use.
It`s because I can by a set from the newspaper , but I cant
here them , speakers will be sent by mail.
Thanks for all help , I need it !
Hitachi
Don C
08-07-2005, 07:40 PM
Very good speakers. Three way with 14 inch woofer.
Did you see the catalog page in the library?
http://www.lansingheritage.org/images/jbl/specs/home-speakers/1984-ti/page07.jpg
Zilch
08-07-2005, 07:55 PM
http://manuals.harman.com/JBL/HOM/Technical%20Sheet/240Ti%20ts.pdf
hitachi
08-08-2005, 06:45 AM
Me again.
Is JBL 240TI a better speaker than JBL 4412 ?
I only can afford 1 set.
Should play music in my livingroom.
I have Yamaha CX2 & MX-2 2 x150 watt RMS.
Like rock and blues.
Fritz
Don C
08-08-2005, 07:50 AM
Yes, 240Ti should be better than the 4412. The bigger woofer should go a bit lower, and the metal frame 044ti tweeter is supposed to be a bit better than the plastic 035. It's not a fair comparison, the 240s are floor standing systems, while the 4412 is bookshelf size.
hitachi
08-08-2005, 09:15 AM
Ok.
Then I buy the 240TI. GOOD looking speakers !
But still I miss a list of data on the 240TI..U knoww 30-20.000 +- 3 Db
and so on.
I am very very glad , that there is a forum like this on the internet.
Good forum and helpfull people in here !
Fritz
hitachi
08-08-2005, 09:22 AM
Hi guys..
I am blind !! I found it...
Thanks a lot for all your help to a newbee.
I am VERY thankfull.
Thanks.
Best Regard from Denmark
Fritz
hitachi
08-08-2005, 09:33 AM
Hi again.
Last one. Is JBL 240TI a hard time for the amplifier ?
How about impedance ? Could u tell me where to find some curves
of impedance / frequence ? That was easy to find for the 4412 in PRO section.
But none in section JBL of the 240TI,,:blink:
Fritz
Don C
08-08-2005, 10:36 AM
This system is pretty much a 250 Ti without the mid bass speaker. So the impedance shouldn't be much different, maybe you can look for 250Ti information. 240Ti did not sell for a long period of time, and there was no pro equivalent, so information is harder to find.
Zilch
08-08-2005, 11:59 AM
Please learn to navigate the site using the "Search" function.
http://audioheritage.org/vbulletin/showthread.php?p=65578#post65578
porschedpm
08-09-2005, 12:23 AM
I have both a pair of 4412 and a pair of 240Ti. I much prefer the 240Ti's in every respect. Much more accurate and extended bass. Better midrange and better, crisper highs. That's not to say the 4412 is any slouch. It is considered one of the best monitors in its size class. As mentioned above, though, the 240Ti is a much larger speaker than the 4412, so placement could be an issue. I'm currently driving the 240Ti's with a 15w/ch tubed integrated amp without any problems so I don't think the 240Ti's are a difficult load to drive. If I could only pick one, and size/placement was not an issue, I would definitely go with the 240Ti.
Michael Smith
08-11-2005, 01:22 AM
It matters little,If you can't get the 4412s' to sound any good,what chance have you got going up to 240tis!
Do the scource end first.
Michael
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.