View Full Version : 4412 Xover schematic
duaneage
07-29-2005, 04:56 PM
Does anyone have a xover schematic for the 4412 ( not the 4412A) handy? JBLPRO.com only has sales literature as far as I can tell and a search on the forum came up empty.
stevem
07-29-2005, 05:00 PM
Try this link:
http://www.jblproservice.com/pdf/Studio%20Monitor%20Series/4412LR.pdf
It's on JBL's pro website under customer service/exploded views/studio monitors.
duaneage
07-29-2005, 05:07 PM
I would not have thought it to be under the consumer section but there you are.
Thanks kindly!
Zilch
07-29-2005, 05:48 PM
The mid and high L-Pads are in series?
What's up with THAT? :blink:
duaneage
07-29-2005, 06:21 PM
There should be an electrical "dot" where the #1 leads crossover the midrange - connection, a typo I am sure since the L pads would be really loopy without a ground
DavidF
07-29-2005, 07:46 PM
There should be an electrical "dot" where the #1 leads crossover the midrange - connection, a typo I am sure since the L pads would be really loopy without a ground
This was mentioned some time ago on this forum. I recall that yes, the two Lpads are connected as shown in the Tech Sheet for the 4412.
David F.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.