Urei 803 recone

[Brandonbeezy]

I have three 803 speakers that all need to be reconed. I was planning on using the kit for the 2214h, but i cannot find a replacement spider to go from the cone to the horn. Does anyone have helpful ideas where to look?

Thanks!!

https://live.staticflickr.com/65535/51675938090_044ca4b170_k.jpg (https://flic.kr/p/2mJqG2Q)2021-11-12_05-02-46 (https://flic.kr/p/2mJqG2Q) by brandon hobock (https://www.flickr.com/photos/153391912@N04/), on Flickr

https://live.staticflickr.com/65535/51675064161_fcdac8a5ab_k.jpg (https://flic.kr/p/2mJmdf6)2021-11-12_05-03-19 (https://flic.kr/p/2mJmdf6) by brandon hobock (https://www.flickr.com/photos/153391912@N04/), on Flickr

[Earl K]

That center part is called a "Spider" .

It's a readily available part from any reconer ( who'll sell individual parts ).

Get the dimensions of it ( overall outside diameter as well as the size of the center hole ).

Ask for a high compliance spider so it doesn't hinder overall cone movement and create a higher than normal Fs ( free air resonance ).
- Buy a black spider >>> or your speakers will really start to look weird ) .

:)