View Full Version : Jbl 2234h
Niklas Nord
04-22-2003, 02:06 PM
What do you guys recommend!
I want to run the 2234H from 50hz to 280hz,
perhaps in an sealed enclousure, or in an bassreflex
enclousure.
fast hifi performance :p
the smaller box the better, but not if it has an impact
on sound . . . . :rolleyes:
Tom Loizeaux
04-22-2003, 07:19 PM
It has been stated on this Forum in previous discussions that
" the JBL 2234 likes 3.15 cubic feet tuned to 37Hz for an F3 ~50Hz."
If you use a smaller enclosure or a sealed cabinet you will not get optimum performance from the 2234 driver.
I run 2234s in my 4320 and 4333 studio monitors because I cross them at 800Hz and was concerned that the lower mids would suffer if I included the mass rings of the 2231s originally supplied with these monitors. I really like the sound of the 2234s and, eventhough they are working in cabinets that were designed for 2231s w/ mass rings, I find the low end to be very satisfying. I even tried to adjust the port lengths to compensate for the loss of mass rings, but after extensive listening, I returned the ports to the original JBL specs and like the results very much.
Tom
Niklas Nord
04-23-2003, 11:27 AM
aha,
anyone having any ideas about the 2234
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.