Delay with Crown DCIN

[baldrick]

I'm useing Crown DCI/N for my LCR and DCI (without DSP) for my subs.

My HT processor does not have auto adjust distance/delay so I need to perform this manually. Does anyone now much distance should I add for the DCI/N because of the DSP?

[srm51555]

I had to call tech support on something else today and they told me the DSP will add around 3ms of delay. If you using Blu-Link it will add an additional 1-2ms as well.

The other question I had was the sample rate of the DSP, which is 48kHz. If I was to bypass the DSP through Audio Architect it would still only sample at 48kHz.

The gentleman was really informative and helpful.

Thanks,
Scott

[baldrick]

Thanx a lot!!

[Jonas_h]

I'm useing Crown DCI/N for my LCR and DCI (without DSP) for my subs.

My HT processor does not have auto adjust distance/delay so I need to perform this manually. Does anyone now much distance should I add for the DCI/N because of the DSP?

This should be measured acoustically. THen you won't have to estimate DSP-delay and you are sure that sound arrives at the same time. This is especially important for the sub-to-main crossover.