Feedback on my project

[wrager]

I have a few JBL drivers sitting around so I might as well build some boxes. Here's what I have:
2 x 2430's
2 x 2431's
2 x 2352 wave guides
2 x 3110A networks
2 x 2035's
2 x 2225's
2 x 2242's

I'm thinking of the 2431/2352 over a 2035 in an 8 cu ft ported box. Would the 3110A x-over work?

What are your thoughts.

[ivica]

I have a few JBL drivers sitting around so I might as well build some boxes. Here's what I have:
2 x 2430's
2 x 2431's
2 x 2352 wave guides
2 x 3110A networks
2 x 2035's
2 x 2225's
2 x 2242's

I'm thinking of the 2431/2352 over a 2035 in an 8 cu ft ported box. Would the 3110A x-over work?

What are your thoughts.

Hi wrager,

JBL 077 ( I would prefer) or 2405A/H are missing......

regards
ivica

[wrager]

Hi ivica! Thanks for responding. Would the addition of either make it a 3-way then?

[ivica]

Hi ivica! Thanks for responding. Would the addition of either make it a 3-way then?

Hi wrager,
077 or 2405 is used for the FR over 10kHz

regards
ivica

[Lee in Montreal]

The 2405 is often used from 8Khz and up.
Crossing at 7Khz is not recommended as the high frequencies will sound harsh.

[wrager]

Thanks again for your feedback guys. I am curious what your thoughts are on the 15" waveguide in the attached picture (AM6215/95). I am very close to being capable of measurements.