ngccglp
12-29-2015, 08:43 AM
Hi,
Recently I acquired a VOTT A7-X and the components are 828C/416-8B/511B/802-8G/N1201-8A.
The N1201-8A is used by the Model 19 which has the 811B, and the 416-8B is not horn loaded.
On the N1201-8A there are 'OPTIMUM' markings for both the MID and HF LPADS. May I know if these OPTIMUM markings apply to the A7-X as well since the horn and the enclosure are different. More specifically, I would assume the 416-8B in the 828C would have higher sensitivity rating than when its used in the Model 19.
OR are the N1201-8As used in the A7-X modified to compensate for the different enclosures?
Thanks.
Recently I acquired a VOTT A7-X and the components are 828C/416-8B/511B/802-8G/N1201-8A.
The N1201-8A is used by the Model 19 which has the 811B, and the 416-8B is not horn loaded.
On the N1201-8A there are 'OPTIMUM' markings for both the MID and HF LPADS. May I know if these OPTIMUM markings apply to the A7-X as well since the horn and the enclosure are different. More specifically, I would assume the 416-8B in the 828C would have higher sensitivity rating than when its used in the Model 19.
OR are the N1201-8As used in the A7-X modified to compensate for the different enclosures?
Thanks.