PDA

View Full Version : 18" Corner Horn


paragon
11-05-2004, 12:54 PM
Look this
paragon
11-05-2004, 12:55 PM
2.
paragon
11-05-2004, 12:57 PM
Response
paragon
11-05-2004, 01:06 PM
Sim without adding low frequency
paragon
12-21-2004, 09:52 AM
No one interesstied in this great sub ???

Eckhard
yggdrasil
12-22-2004, 04:45 PM
I think it seems very interesting. Tell me more, like expected frequency response, dimensions et.c.
paragon
12-23-2004, 09:32 AM
Dimensions are 1038 (H) x 752 (W) x 749 (D) mm. Reponse you can see on pic 3, very low for a "small" corner horn with a little help from subamp at 30 Hz.
Max output is 130 dB at 200 Watts with this cheap 18" driver.
Will build one later with my 18" Craaft driver.

Eckhard
yggdrasil
12-23-2004, 09:58 AM
Very interesting. Please post updates as your project emerges.

Do you know the frequency response of the Paragon?
paragon
12-23-2004, 11:13 AM
No sorry, think you want to know the "low response".
Tried a sim month ago and i think lowest usable reponse is at 45-50 Hz because of the small mouth opening and short horn.
Ask Oldmics for the paragon, he can tell you something about. Upper response may be at 15 KHz (075).

Eckhard
Wardsweb
12-23-2004, 11:40 AM
Nice project. I really like bass horns. Kind of a modified Khorn bass cabinet. You could also add some driver(s) to make a nice 2 or 3 way speaker. Maybe a mid-horn laid on top and a 077 mounted in the face towards the top.
paragon
12-23-2004, 01:17 PM
Yes, but look at response, you can only use this till 150 Hz, so it`s only a subwoofer.

Eckhard
JBLGUY
01-01-2005, 10:56 AM
My Buddy makes his own 18 inch Corner cabinets. They are very large and heavy. They definatly go lower than a 15 inch corner cab. He has a new disign for this 18 inch and the first pototype was very impressive. The new cabinets go down to about 23hz. He increased the back chamber. This made a huge differance. unfortunatley this new cab weighs over 300 lb's


If anyone has any interest let me know

:)
paragon
01-06-2005, 11:41 AM
Yes but it also increases(?) the cone movement. So sim it and you see what you get. But beleive, this is one of the best subs you can get !!

Eckhard
paragon
01-06-2005, 11:45 AM
I will use this horn with an 18" Craaft driver which also works in this sub chamber and i will post response of this when i`m finished.

Eckhard