View Full Version : E145
ChitoBG
12-16-2014, 08:25 PM
Merry Christmas fellow Audio Enthusiasts!
What would be the ideal volume of E145. Would also appreciate box and port dimension.
Best Regards!
Mr. Widget
12-16-2014, 10:08 PM
It's listed here (https://www.jblpro.com/pub/manuals/enclgde.pdf).
Widget
ChitoBG
12-16-2014, 11:22 PM
It's listed here (https://www.jblpro.com/pub/manuals/enclgde.pdf).
Widget
Thanks a lot!
ChitoBG
12-17-2014, 10:13 PM
It's listed here (https://www.jblpro.com/pub/manuals/enclgde.pdf).
Widget
Hi Mr. Widget,
Can I use a bigger box for the e145 to tune it to 30hz if possible. Can I have your recommendation for the dimension of the box and ports?
Thanks!
Mr. Widget
12-17-2014, 11:42 PM
Hi Mr. Widget,
Can I use a bigger box for the e145 to tune it to 30hz if possible. Can I have your recommendation for the dimension of the box and ports?
Thanks!I am not currently running BBPro or any other simulation software so I can't offer a solution. That said, I'm fairly certain the E145 will not offer optimal transient response and overall performance if tuned that low.
Widget
ivica
12-18-2014, 03:01 AM
Hi Mr. Widget,
Can I use a bigger box for the e145 to tune it to 30hz if possible. Can I have your recommendation for the dimension of the box and ports?
Thanks!
Hi ChitoBG,
Larger box ( say +50%) would enhance LF response about several Hz,
but only real improvements I can imagine if the driver would be mounted about 90cm from the floor,
bass reflection from the floor would help to enhance lower LF frequency...( +6dB LF rise - shelf from LF to 100Hz ).
regards
ivica
spkrman57
12-21-2014, 02:48 PM
I heard E145's in the cabs above(4648 cab) one 15" used and sealed other opening and left ports alone.
Sounded pretty good to me. Not subs, but good enough LF drivers to me in that cabinet.
Regards, Ron
ChitoBG
12-21-2014, 06:08 PM
Thanks for the recommendations.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.