View Full Version : What Altec ?
lasse
01-19-2014, 04:14 AM
Hallo !
I can se that this is an Altec bass !!
reconed........but ?
can anyone see what model it is ?
the seller say that it is one in the 515 series........??
lasse
Mostlydiy
01-19-2014, 01:20 PM
515-g presumably
/Mostly
Looks like a component version of the 416-8C to me. The magnet diameter is too small for a 515E. The cone is proper for either the 416 or 515E. The 416 has a 7.5 inch diameter magnet, the 515 is over 8 inches. Jim
robertbartsch
01-20-2014, 05:19 PM
...all the 416s had a hole in the cone like the one shown here; right? ....not on the 515..... I believe...
the 416 is a good hi-fi woofer....
Fort Knox
01-24-2014, 04:34 AM
...all the 416s had a hole in the cone like the one shown here; right? ....not on the 515..... I believe...
the 416 is a good hi-fi woofer....
I would not buy into any speaker w/no badge..
a gaussmeter might help....
NickH
01-24-2014, 10:23 AM
That frame isn't a 416 either. There is a vent on the back of the woofer. Both 416 and 515 have a dust cap vent I think. Since there's a vented dust cap and a vented magnet makes this drivers basically useless in the present config.
But I'm no expert.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.