ffppss
12-11-2013, 04:10 PM
Hi There, long time lurker from the UK here,
I'd be interested to know peoples opinions on a specific problem i'm beginning to have....
Im building a soundsystem!
so far its 2 stacks, each stack is 2 X Yuchi e-170 stacked http://www.geocities.jp/arai401204/Enclosure/E170/E170.html
with TAD 1601b drivers
each stack has a TAD 4001 horn on top.
Bryston 10B X over at 700hz (for now....)
i'd be interested to know what people think about driving the 1601b drivers.
From the technical information (its a bit misleading since the overviews says 500W, but technical spec says 300W)
http://tad-labs.com/en/professional/unitspeaker/unit1.html
so I think i need to get 4 channels running 8ohm at ~800W, class a/b...
does anyone have any experience with these drivers?
its going to be used in a small, club space, so needs to deliver high spl at times!
thanks for reading!!
I'd be interested to know peoples opinions on a specific problem i'm beginning to have....
Im building a soundsystem!
so far its 2 stacks, each stack is 2 X Yuchi e-170 stacked http://www.geocities.jp/arai401204/Enclosure/E170/E170.html
with TAD 1601b drivers
each stack has a TAD 4001 horn on top.
Bryston 10B X over at 700hz (for now....)
i'd be interested to know what people think about driving the 1601b drivers.
From the technical information (its a bit misleading since the overviews says 500W, but technical spec says 300W)
http://tad-labs.com/en/professional/unitspeaker/unit1.html
so I think i need to get 4 channels running 8ohm at ~800W, class a/b...
does anyone have any experience with these drivers?
its going to be used in a small, club space, so needs to deliver high spl at times!
thanks for reading!!