View Full Version : Re applying Folical Badges
Audiobeer
03-11-2012, 06:43 PM
I've removed the folical badges off of my studio monitors and was wondering if someone here had a good method for reapplying them. I cleaned the excess adhesive the best I could off the back.
subwoof
03-11-2012, 07:09 PM
contact cement works well - let it dry a full 10 min before sticking it on. a little goes a LONG way.
*wait*
where are these located and what model???
Audiobeer
03-11-2012, 07:49 PM
They are 4313B's and they are right on the face in the front. Any specific brand of contact cement? Thanks Sub! :)
subwoof
03-11-2012, 08:14 PM
if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.
Audiobeer
04-28-2012, 05:47 PM
if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.
I found some Weldwood contact cement. Thanks Sub. Will give this a shot!
subwoof
04-28-2012, 06:01 PM
use CONTACT CEMENT....
The manufacturer I see the most often is DAP / weldwood.
Audiobeer
04-28-2012, 08:01 PM
Thanks Sub. Just got back and put a coat on.
SteveJewels
02-15-2017, 07:26 PM
Thanks Sub. Just got back and put a coat on.
Wow! Beautiful speaker!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.