View Full Version : 4301 gril dimensions
Anyone have the dimensions for the 4301 grille? I just missed a pair on ePay a couple of weeks ago....
I can get the outside dimensions but would like to get the inside dimensions, grill thickness and the radius of the outside edge.
I bought a pair of 4301E (SN 10080 and 10082) and have them going again after a refoam and would like to give them to my daughter for Christmas. Already got the blue cloth from Doodle6 a couple of months ago.
Thanks,
Wayne
austx
12-19-2011, 08:20 AM
are they 4301 or 4301B outside dimensions?..
austx
12-19-2011, 05:35 PM
I had a few minutes, so I measured my 4301B grills and whipped up a drawing..attached..
I work in decimals, so that's the dimensions you get..most of them will convert to usable fractions..
good luck..
Really appreciate it, looks like the 4301E has the same externals as the B.
Thanks for the help,
Wayne
austx
12-28-2011, 06:29 PM
if you happen to have extra of that blue, I'd be interested in enough of it to do my 4301Bs..
I'll measure twice to see. I bought enough to do my 4315s and 4311s so getting the 4301s done is going to require some "stretching" as it is.
(I like the blue.....:)....)
With luck I can get them done this weekend and let you know.
Thanks,
Wayne
Might try some of the folks in this thread also:
http://www.audioheritage.org/vbulletin/showthread.php?30261-JBL-Blue-and-Black-Grille-Cloth-(2011)
austx
12-28-2011, 10:22 PM
Thanks..
If you get a chance, post pictures of the grills you make..and share your experiences regarding the gluing of the fabric to the frames..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.