View Full Version : K120 recone with 2204 kit ?
Can a K120 be reconed with the 2204 (c8r2204) kit?
Regards, Espen
baldrick
09-12-2011, 12:48 PM
They certainly do not look the same so I wouldn't think a reconed K120 would be the same... But maybe it sounds simmilar but don't have the powerhandling of the 2204h?
edgewound
09-12-2011, 04:21 PM
Can a K120 be reconed with the 2204 (c8r2204) kit?
Regards, Espen
Yes...It will fit/work just fine, and function as a 2204.
baldrick
09-12-2011, 11:58 PM
Yes...It will fit/work just fine, and function as a 2204.
Even without reduced powerhandling :confused:
4313B
09-13-2011, 05:26 AM
If the alnico magnet is charged to spec then the K120 reconed as a 2204 will be functionally equivalent except for power handling. The SFG ferrite structure is a bit better heat sink.
Of course, once you dump enough current into the driver to make power handling an issue you'll end up with a partially discharged platform anyway.
Thanks for your answers, guys.
The alnico motors looks good - I'll measure and check if the speaker is up to (the 2204) specs.
Cheers,
Espen
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.