View Full Version : Excurted 2213h woofer
original jblguy
03-21-2010, 02:43 PM
Hi,
I stored a couple 2213's face to face magnet down for some time. when i went to use them the cones settled out in one direction. is there any thing i can do, such as storing them in the opposite direction for a while???
Thanks, in advance :o:
Robh3606
03-21-2010, 08:22 PM
I have 2 pair I flip every month or so.
Rob:)
subwoof
03-22-2010, 08:21 AM
On the foam woofers that protrude beyond the gasket I install a 1/4 t-nut with a short bolt on the mounting holes so they can be stored face down while inside the box.
Another tip is to use some empty toilet paper rolls ( cut in half ) that are partially flattened in between the frame ribs and cone to push the cone *out* to help correct a storage sag. Use at least 4 to evenly support the cone.
It's an art form and different for each type...good luck
sub
badman
03-22-2010, 09:29 AM
On the foam woofers that protrude beyond the gasket I install a 1/4 t-nut with a short bolt on the mounting holes so they can be stored face down while inside the box.
Another tip is to use some empty toilet paper rolls ( cut in half ) that are partially flattened in between the frame ribs and cone to push the cone *out* to help correct a storage sag. Use at least 4 to evenly support the cone.
It's an art form and different for each type...good luck
sub
One can also use a small DC source and bias the cone in the correct amount and direction.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.