Have LE15A's & LE85 horns - need a cabinet design

[mchristiansen]

Years ago I traded for the following JBL components. I have 2X LE15A's, with PR15 passive radiators, 2X LE85 horns with LX5 crossovers. I'm looking for a cabinet design that is compact (for 15's) and is effecient and give me good base response. Will power with a Hafler 9180 (100 watts pc).

Is there a speaker design out there that we can build here in Seattle.

Thanks for the input.

Marc

[Mr. Widget]

This guide gives good basic info as well as specific tuning info for your woofers. You will need to build enclosure #8 for your S7 system.

http://www.jblpro.com/pub/manuals/enclgde.pdf

I'd recommend you not use the passive radiators to get the best performance and most compact cabinets.

You should also read up on lans-a-loy surrounds.


Widget

[Beowulf57]

Also check here (page 5, etc.): http://www.lansingheritage.org/html/jbl/plans/1970s-kit.htm

[jcrobso]

In addition to much bigger, about 8 cubic ft. if I remember correctly.

[mchristiansen]

Thanks everyone for the comments and suggestions. Will read up and do some exploring. Will report back...

Cheers from Seattle,

Marc