mtchyz250f
09-17-2009, 06:44 AM
I have just purchased three 4268b cabinets for the purpose of starting a project. I would like to do the project in phases so I always (or almost always) have something to listen too.
Phase 1 –
Replace 2118’s with 2123’s –I would like to replace the 2118’s with 2123’s that I already have. Will I need to modify the crossover for the switch? Are there other simple changes I should make to the crossovers at that time?
Cabinet – A tapered tower type with removable from panels so I can change or add speakers for experimentation. The E145 and 2123 will not be changed out, but I plan on experimenting above the 2123’s such as adding a 2105 later is very possible. These are going into the living room and I need to keep the cabinet size to 3 cu/ft. I have a sub, so is porting the E145’s needed?
Phase 2
2405 Diaphragm – Replacement D16R2405. I understand that good after market diaphragms can be purchase for about $30 off eBay. Can someone recommend a vender I can trust?
Phase 3
Experimenting above the 2123’s.
Phase 1 –
Replace 2118’s with 2123’s –I would like to replace the 2118’s with 2123’s that I already have. Will I need to modify the crossover for the switch? Are there other simple changes I should make to the crossovers at that time?
Cabinet – A tapered tower type with removable from panels so I can change or add speakers for experimentation. The E145 and 2123 will not be changed out, but I plan on experimenting above the 2123’s such as adding a 2105 later is very possible. These are going into the living room and I need to keep the cabinet size to 3 cu/ft. I have a sub, so is porting the E145’s needed?
Phase 2
2405 Diaphragm – Replacement D16R2405. I understand that good after market diaphragms can be purchase for about $30 off eBay. Can someone recommend a vender I can trust?
Phase 3
Experimenting above the 2123’s.