jarrods
06-11-2004, 07:06 PM
Well phase one of my 4344 project is completed (he hopes... not tested yet); my crossovers are done. I made up some PCB blanks with the old etch resist pen, very crude but effective.
I have used Mills resistors, Hovland caps, local electronic shop air coils (tweeked to correct inductance) and an Alpha-Foil copper foil inductor.
This crossover is only for the MF, HF and UHF drivers as I intend to bi-amp when finished.
A BIG HUGE thanks to Ian Mackenzie..... for hints, circuit diagrams, and where to get bits assistance. Also I believe I owe Greg Timbers (JBL) thanks as well for the redesign of the circuit for us guys.
I have used Mills resistors, Hovland caps, local electronic shop air coils (tweeked to correct inductance) and an Alpha-Foil copper foil inductor.
This crossover is only for the MF, HF and UHF drivers as I intend to bi-amp when finished.
A BIG HUGE thanks to Ian Mackenzie..... for hints, circuit diagrams, and where to get bits assistance. Also I believe I owe Greg Timbers (JBL) thanks as well for the redesign of the circuit for us guys.