View Full Version : Spec sheet 2121 lost
Guido
06-02-2003, 12:14 PM
I never had one spec sheet from the 2121.
Giskard posted that he lost his.
Who can help?
I'm interested in the SPL and impedance curves.
Thank you, Guido
Guido
06-02-2003, 02:40 PM
I'm just interested in the curves!
For comparison with other 10" midrange drivers. If you have a spec sheet for 2121 and/or 2122H please post it or send it to me.
For my 4343 project I'm fine until I tested the 2012. Will let you know the results. At the moment I'm waiting for the K140 to be reconed to 2235.
Guido
4313B
06-03-2003, 09:48 AM
The 2121 spec sheet is NLA.
*****
Sorry about having to delete the graphs. Hope you got them downloaded while they were posted.
Guido
06-03-2003, 11:48 AM
Hi Giskard!
This time you surpass yourself!
Thank you!
Where do you get all this from?
Don't tell me the Delphi story ;)
A big hello from Germany
Guido
boputnam
06-03-2003, 12:11 PM
How 'bout the venerable 2245H?
Pretty please?
:(
Earl K
06-03-2003, 01:48 PM
Thanks ! Giskard, for the reponse curves .
Interestingly , my blend of a le14h & le10h-1 / paralleled together on each side (MTM) / shouldn't work as well as it actually does / strickly according to the sensitivities stated . I suppose actual AC impedance differences & the relative vertical placements, is making up the apparent sensitivity difference . ( In fact , I've had to dial back the le10h-1 by adding a series, 1 ohm resistor - sometimes also, an inline inductor to reduce that midband rise .)
regards <. Earl K
boputnam
06-29-2003, 03:47 PM
A hearty THANKS, Giskard, for the 2245H plot - timing could not have been better!
Snagged it before the Post Police called on us... ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.