View Full Version : JBL4410a 10"woofer
ajcamlet
03-24-2004, 12:16 PM
Is there anything out there i can replace this with besides the stock transducer?
boputnam
03-24-2004, 12:37 PM
Why would you want something different? :confused:
ajcamlet
03-24-2004, 12:58 PM
The stock ones are hard to come by.
Robh3606
03-24-2004, 01:08 PM
Have you tried E-Bay??
Rob:)
ajcamlet
03-24-2004, 01:12 PM
sure have...Typically i would have to buy the whole monitor..
There must be something else i can put in there for the time being...
Don C
03-24-2004, 10:12 PM
I have seen dozens of those woofers go on eBay. I have even sold sold one good one myself, and also I have bought two bad ones. Make sure to search weekly for 127H-1. If you want to buy two baskets that will need to be reconed, send me a PM.
GordonW
03-25-2004, 10:13 PM
It's not in the greatest cosmetic shape, but I have a single 127H that should work well enough, at least as an interim woofer. And, it could easily be reconed with the 127H-1 kit, later.
In fact, I actually have a second CONE that I salvaged from a bad recone... the VC was damaged, but I managed to seperate it from the cone, without damage to the cone. If someone could supply a 125H or 127H basket, I could easily make another 127H out of it... cheaply. I have an appropriate voice coil, spider and such, all I need is the basket, and it could be a working speaker...
Regards,
Gordon.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.