View Full Version : Crossover for 2405 16 Ohm
Dieter
05-24-2003, 02:11 AM
Hi,
im looking for a crossover-schematic 7500 Hz 12 or 18 db for the 2405 16 Ohm.
Can somebody help?
Thank you for the answers.
BestRegards
Dieter
4313B
05-24-2003, 05:21 AM
You might want to look at the 3106 or 3107 high pass filters
http://www.jblproservice.com/navigation/Network%20Schematics.html
The "best" is probably the 3145 or 3155 high pass filter.
Dieter
05-24-2003, 08:56 AM
Hi Giskard,
thank you.
In the "frequency dividing Networks" pdf JBL says, that the 3105 and 3106 is for 16 Ohm.
But in the:
http://www.jblproservice.com/pdf/Network%20Schematics/3106%20Network.pdf
JBL say it is for 8Ohm.
Am i wrong?
In:
http://www.jblproservice.com/pdf/Network%20Schematics/3105%20Network.pdf
JBL says it is for 16 Ohm
What is about this network for he 2405?
In:
http://www.jblproservice.com/pdf/Network%20Schematics/3107%20Network.pdf
JBL says it is for 8Ohm.
Thank you Giskard: you are very helpful.
Dieter
4313B
05-24-2003, 09:21 AM
I think you are referring to the test loads in the network service bulletins. JBL has to have a standardized way to test networks and the answer is:
http://www.jblproservice.com/pdf/Network%20Schematics/Standard%20Test%20Fixture.pdf
If you are measuring the voltage drive of a network LOAD Z tells you what to load the network with to obtain the values in the table:
Mr. Widget
05-24-2003, 10:28 AM
Originally posted by Dieter
Hi,
im looking for a crossover-schematic 7500 Hz 12 or 18 db for the 2405 16 Ohm.
Can somebody help?
Thank you for the answers.
BestRegards
Dieter
I am using the 3155 circuit and it really allows the 2405 to sound great.
Don't worry about it being referred to as an 8 ohm circuit. JBL is a bit weird about driver impedance. Since the 2405 is not as low an impedance as a true 8 ohm device they have been referred to as 16 ohm drivers. The actual impedance at the crossover region is more like 10 ohms I believe. For some reason they have also been referred to as 8 ohm drivers in other years.
JBL has only made one impedance of the 2405/2405H even though the name plates say 8 or 16, and the JBL circuits are also labeled some 8 and some 16.
The 3145 and 3155 crossovers are much more recent designs than the 3107 or 3108 and in my opinion are vastly superior. I realize that these are both crossed over higher than your stated 7500Hz, but the 2405 sounds better crossed over higher.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.