MJC
05-17-2003, 09:21 AM
I am currently using a B212, which I have replaced the 75W amp with a 150w plate amp. This sub is used in a 5.1 setup. With twice the wattage I really get a lot more kick for the soundtracks. But when large explosions occur the voice coil will extend to far and then I have to put a small amount of pressure on the dust cap to get the voice coil back in the gap. The amp is set at 1/2 volume.
So want would be a good replacement for the 121A driver, that has a long throw, to prevent this from happening?
I'm also thinking about building another sub using one of my LE14As so I can have two subs in the setup. Will the LE14A have the same problem as the 121A with a 150w or larger amp?
So want would be a good replacement for the 121A driver, that has a long throw, to prevent this from happening?
I'm also thinking about building another sub using one of my LE14As so I can have two subs in the setup. Will the LE14A have the same problem as the 121A with a 150w or larger amp?